SAS- CUSTOM MADE SOLUTIONS

SAS- CUSTOM MADE SOLUTIONS

Anzeige pro Seite
Sortieren nach

SAS_X2_PRO_ Power & CAN & Telemetrie

Y-CABLE LUMIRANK_CAN to MyLapsX2 Pro Racelink to Telemetry & Power cable_

X2PRO RACELINK only and only if a Logger need to connect  

Include the Conter Plug DTM for Logger Cable with Install Guide

Connction INFO:  DTM04-2P  

CAN H  > PIN 1  (black wire SAS)

CAN L  > PIN 2  (white wire SAS)

174,90 *
Auf Lager

SET_1_SAS_for_X2PRO & LR & DID

SET with:

1x LR POWER CABLE 12V (green Plug)

1x M8 Y CABEL  F-M-F

1x SAS Y-CABLE LUMIRANK_CAN to MyLapsX2 Pro Racelink
to Telemetry & Power cable_

1x M8 Driver Display extension Cable

USE to Connect: 

LUMIRANK & DID & X2 Raclink PRO

Include the Conter Plug DTM for Logger Cable with Install Guide

236,90 *
Auf Lager

SET_2_SAS_for_X2 PRO & DID

SET with:

1x SAS POWER CABLE 12V ( need if no LUMIRANK is installed)

1x M8 Y CABEL  F-M-F

1x SAS Y-CABLE LUMIRANK_CAN to MyLapsX2 Pro Racelink
to Telemetry & Power cable_

1x Driver Display extension cable

USE to Connect  DID / X2 Raclink PRO  (without LUMIRANK)

219,90 *
Auf Lager

SET_3_SAS for _X2_CLUB & DID & LR

SET 3 with:

1x LR POWER CABLE  12V  (green Plug)

1x M8 Y CABLE F-M-F

1x M8 Driver Display extension Cable

1x Install Info

USE for:

Connect>  LUMIRANK / DID / X2 Racelink Club

64,90 *
Auf Lager

RF- PCB BASE SMA bracket (Airal include)

 Key features

  • Inside - out mounting for X2 SMA Antenna
  • Size 69mm x 69mm x1,4mm (PCB)
  • Include 3M Dual Look SJ 354 Stripes
  • High Quality SMA Connector & Cable
  • CU PCB Baseplate with solder SMA 
  • SAS/DL RP-SMA Antenna 3dBi for X2 RaceLink PRO / CLUB
79,00 *
Auf Lager
Lieferzeit: 1-3 Werktage

SAS Driver ID Modul KIT for MyLaps X2 (CAN) & TR2 Transponder

Technische Daten / Key features

SET. include  PCB MODULE / HOUSING / M8 CABEL (CAN or TR2) / ASSAMBLY

  • Software für MyLaps TransX 260 DPI  / X2 CAN /  TR2 Transponder
  • Aktuell FW 2023
  • Maße 56mm x 56mm x 20mm / size 56mm x 56mm x 20mm
  • M3 Gewindebuchse vormontiert / M3 Insert preassembled
  • Systemgewicht 29g /  system weight 29g
  • Fahrer ID 7 Seg. Display integriert / Driver ID 7 Seg. Display integrate
  • Hochwertigste Ausführung "Race Spec." / highest quality production Race Spec.
  • Steuerung CAN für X2 Transponder / Communication CAN for X2 Transponder
  • NEW: ANALOG IN für z.b. Helmplug ID / Resistor dedection for existing ID Systems z.b. Helmet Plug
  • 12V 0,5A Versorgung notwendig /12V 0,5A Powersupply need
199,60 *
Auf Lager
Lieferzeit: 3-4 Werktage

SAS Driver ID LED UNIT incl. Data/Power Cable M8 extra 3m

Key features

  • RGB LED Unit for DRIVER ID
  • size 50mm x 50mm x 10mm 
  • system weight 45g> 55g depence on housing version
  • highest quality production Race Spec.
  • Prepared for CAN Communication MYLaps X2 Transponder / TR2 */ X2 PRO
  • Connect in between the MyLaps Transponder System and Driver ID Modul
  • Connection Cable M8 Y extra 3m long Include 
  • Power Cons. 12V / 1A / IP63 / full cast filled /

    * TR2 only with Driver ID Modul  >22 Analog In
  • Please note that Shipping to other then DE will take extra Shipping cost on cost.
289,00 *
Auf Lager
Lieferzeit: 6 Werktage

SET_4_SAS for _X2_CLUB & DID

SET 4 with:

1x M8 Y CABLE F-M-F

1x M8 Driver Display extension Cable

1x M8 Power Cable

1x Install Info

USE for:

Connect> / DID / X2 Racelink Club

57,90 *
Auf Lager

LR>X2 Bridge Cabel

Key features

Bridge Cable to use only when no LUMIRANK  DISPLAY is installed 

So there is no need to change the X2 RaceLink instalation for 1 Race.

The Bridge Cabel close the open M12 Power to the M8 Y Cable to Racelink and Driver Display then.

64,60 *
Auf Lager
Lieferzeit: 3-4 Werktage

SAS_X2_RF-GPS SET

SET with:

1x SAS_ X2 RF Antenna incl SAS - PCB bracket

1x SAS_X2 RF Antenna SMA Extension 1m 5mm low less

1x SAS_X2 GPS Antenna

USE > for all X2 Racelink installing

179,00 *
Auf Lager
*
Preise zzgl. MwSt., zzgl. Versand